Peugeot 208 GTI 1.6 THP208 MY2017 - Etuners Stage2 95RON
A Peugeot 208 GTI 1.6 THP208, made in 2017 – custom tuned for Stage2 on 95RON fuel. Peugeot and Citroens latest THP208 engine, code EP6-FDTX complies with Euro6 emission regulations. It produces a little bit more power as stock over EP6-CDTX, which is THP200 and complies with Euro5 emission regulations. It features Valvetronic cylinder head
This is the new gear set, ready to go in!
Any owner of a 207 THP will tell you that the 5speed gearbox needs a longer 5th gear. The 5th gear ratios on both 207 THP150 and THP175 are very short and not useful for good fuel efficiency. Peugeot and Citroen fixed that problemyears later, by switching over to a 6-speed gearbox in facelift THP156
Peugeot / Citroen 1.6 THP engine maintanance
How to keep your THP engine healthy and happy Keeping your THP engine healthy and happy is a simple process. All you need to do is follow some key points in its maintenance. We hope this guide will help extend your engine’s life. Prince engine codes covered are EP6-DT, EP6-DTS, EP6-CDT, EP6-CDTX, EP6-CDTM and EP6-FDTX.
Peugeot 207 GT 1.6T (150hp) - Stage 4 JCW hybrid + cams
Many 207 owners upgrade their turbos with bigger wheels, to make them more efficient and powerful. The following upgrade stage combines Upgraded camshafts (boubiscams) with a JCW compressor wheel on the turbo. The owner wanted to have different boost levels available: Low boost for daily driving and high boost for performance. This was done by

FlasherTHP changelog and updates list

20171116: Additional ECU types support added 20171105: More ECU types support added Preliminary support for MED17.4.4 / tc1793 20171023 Sunday: FlasherTHP can do an OBD read of MED17.4 ECUs again, apart from virtual reads. Flash protocols updated to cover more ECU hardware types Accelerated OBD Flash procedures over previous versions Compatible only with OBDLink-SX USB
Citroen DS5 1.6T THP163 with a JCW hybrid turbo and Etuners stage4 ECU remap
The Citroen DS5 1.6T usually comes with an EGS automatic gearbox and the Euro5 version of THP engines – THP163. It uses the same stock KKK turbo found on THP150 and THP156 at higher boost,  utilises different electronics and an electric oil pump compared to its previous engine versions. The Engine Control Unit is a

Peugeot Partner 1.6 HDI/ e-HDI Stage 1

The Peugeot Partner 1.6 HDI (also known as e-HDI) produces  68kW/92hp engine power. The manufacturer claims that its maximum torque is 215 Nm. On the dyno the stock power was measured 97PS and stock torque 230Nm. Our goal for the remap was to see how much more power could be made out of its little
This tiny 1.4 HDI70 engine is a downscaled version of the very successful 1.6 HDI and is usually found on the Citroen C3 and Peugeot 208. Other models use it too, but on the heavier platforms like the C4 and 308 it is no fun at all, due to the increased weight of the car.
Tagged under: , , , , ,
The addition of an intercooler kit and a full exhaust system brings more power from the THP200 engine. Both of them are necessary. The intercooler to control intake air temperatures, as the stock unit is very small. And the exhaust to improve flow after the turbo and make it more efficient at the same boost
A few years ago we tried and successfully installed a VAG blowoff valve in place of the stock one on the Peugeot 207 GT/GTI/RC 1.6T. Both valves are made by Pierburg. They are electrically compatible but the VAG bov has a better coil and better overall build which allows it to withstand more boost without