CREATE ACCOUNT

Wednesday, 03 August 2016 / Published in 135, BMW, ECU Remaps
N54 engines can get boosted performance with an upgraded downpipe, an upgraded intercooler and boost pipe. By remapping the stock ECU with a Stage 2 ECU remap we increase boost pressure, adjust fueling and ignition accordingly. The engine’s rev limiter is also slightly increased. In case of race use (off road), the vmax limiters and
Friday, 08 July 2016 / Published in 640, BMW, ECU Remaps
The BMW 640i F12 uses the N55B30O0 engine. It produces 235Kw (=322hp) at the flywheel based on the manufacturer’s claims. The engine is controlled by a Bosch MED17 ECU, hidden deep inside the engine bay. To get the best performance out of it with the minimal hardware modifications, an upgraded downpipe is strongly recommended. Reduced
Thursday, 02 June 2016 / Published in 335, BMW, ECU Remaps
BMW 335i N54 with an Etuners custom tune only. The 07 BMW 335i N54 twin turbo is rated at 225kw (306hp) with a 0-100kph of 5.7secs. This car dynoed stock at 170.8kw (232 whp) at the wheels. With the installation of an custom Etuners Stage1 tune, power rose by 44kw to 214.2kw (291 whp). This
Monday, 23 May 2016 / Published in BMW, ECU Remaps, X1
Just an F-series with a remap is enough to make things interesting. The car gains 50hp and 70 Nm just with a stage 1 remap and 98RON! Road performance is significantly better and throttle response improves quite a lot too. Upgrade specifications 98RON fuel Stage 1 ECU remap   Performance results Maximum power: 299 PS
Wednesday, 13 January 2016 / Published in 316, BMW, ECU Remaps
It was about time for the BMW to get back into the game of the luxurius and sport sedans. At last the very well known 3-series became turbo in it’s gasoline engines in the whole range from the 316i to the M3. The 3-series starts from the 136hp in the 316i model equipped with the
Tuesday, 01 December 2015 / Published in BMW, ECU Remaps
Etuners stage 2 tune and upgraded cat back exhaust . Impressive gains of approx 20kw at wheels throughout the entire rev range with a big improvement torque . Upgrade specifications Stage 2 ECU remap Upgraded full exhaust Performance modifications Removal of stock torque limitations. Increasing the maximum speed limiter for race use. Increasing the rev
Thursday, 29 October 2015 / Published in 116, BMW, ECU Remaps
The new BMW F20 116D with the 1.6 turbo diesel engine from BMW is upgradeable and with good gains in our stage 1 remap… The car becomes 40Nm torquer at the mid range but+33hp more powerful at the whole powerband… The dyno figure  and the photos bellow speaks for itself. Upgrade speficications Stock hardware Stage 1
Monday, 26 October 2015 / Published in 116, BMW, ECU Remaps
BMW F20 Etuners Stage 1
The BMW 116i 1.6T F20 produces around 136hp, based on the manufacturer’s claims. In reality, the stock power output is much higher. On the dyno it makes about 150hp, which is expected based on the calibration settings and its turbo size. This engine comes with the Valvetronic system on the cylinder head, controlling valve lift
TOP